Channel & Trading Configuration
Dor avatar
Written by Dor
Updated over a week ago

The channel configuration is probably the single most important part of any channel setup, where you can set your channel's general configuration and trading configuration.

Channel Configuration

The Channel Configuration is where you can set your general channel's configurations, such as disabling or enabling Hedge Mode. To access the channel configuration screen, navigate to your admin panel and click on the Channel Configuration button. You will be met with the following screen (figure 1).

Go to Admin Panel > Groups > Choose the desired group > Channel configuration:

Figure 1: Channel Configuration

1 - Close Trade On TP Before Entry: This option, when enabled, will close the signal if the Take-Profit target is reached prior to the Entry target.

2 - Show Publishers: This setting, when enabled, will show the Telegram username of the Signals publisher at the bottom of the signal.

3 - Hedge Mode: This feature enables you to select between 'One-Way' and

'Hedge' mode for exchanges Binance Futures and ByBit USDT.

Trading Configuration

The Trading Configuration is where the instruction will come from on what the admin intends for the signal to do in terms of trailing, entry, and take profit strategy. To access the channel trading configuration screen, navigate to your admin panel and click on the Trading Configuration button. You will be met with the following screen (figure 1).

Go to Admin Panel > Groups > Choose the desired group > Trading configuration > Choose between Leverage\Non-leverage Exchanges:

Choose_Exchange.PNG

Figure 2: Channel's Trading Configuration Selection

These both have the same contents inside but are intended to have separate setups if the channel is posting both leverage and non-leverage signals. For this example, we will be using the contents of the Leverage exchanges button. You will be met with the screen as per figure 3.

Channel_Configuration.PNG

Figure 3: Channel's Trading Configuration

The default settings for all new channels are set to the User’s personal configuration. This means that each user receiving the signals will open their trades based on the user's personal trading configuration in their own local bots. The admin has the ability though, to select whichever strategy they want in the above screen, and that will be pushed to users instead. For example, having a specific type of stop-loss trailing or a certain entry strategy that utilizes the increasing exponential strategy.

User's Personal Configuration

For the intent and purposes of this document, we will not be going into any detail on the user's personal and specific configuration options, but they can be easily accessed via the Configuration section. Below is an image of the default personal user configuration. Override: No will use the channel's configuration if it was set. If the admin has not specified anything, it will use the parameters set on the user's personal configuration.

Personal_config1.PNG
Personal_config2.PNG

"Override: Yes" will ignore the signal instruction and override it in the specific configuration lines (but still use the pricing info). For a user to make his configuration overrides the channel's configuration (Override: Yes), he will need to click the "Switch to personal configuration" button on his bot's personal trading configuration after setting the desired parameter.

Switch_to_personal.PNG
Did this answer your question?